福邦化学润滑油(越南)责任有限公司
FORBON CHEMICAL LUBRICANTS (VIETNAM) CO., LTD.
SERVICE HOTLINE
0274-3662905
0366-642808
FOLLOW US
BACK TO LIST
Must Read Defore Purchasing Oil Products:

A. There are too many oils. It takes a lot of time to choose. You can tell the customer service to recommend the cost-effective cleaning agent for you, no need to turn the page to find.

 

B. Understand the oil product you need, you can directly inform the customer service of the oil product name or related parameters, and get relevant product information and quotation immediately.

 

C. If the purchase volume is large, you can find out the products with good market sales through customer service through the channels below, and obtain product quotes at the same time.

特点.jpg

 

FABLE Metal Cleaning Agent W-806 is an efficient, energy-saving and environmentally friendly water-based cleaning agent. It is not a hazardous chemical and does not contain chemicals such as trichloroethane, trichloroethylene, and acetone; it eliminates the past The use of chlorine and sulfur-containing cleaning agents to environmental pollution and human harm, the ozone destruction coefficient is zero.

 

用途.jpg

 

◆ Efficient: It can quickly remove the oil and rust on the surface of copper, aluminum, steel and other components. And good anti-rust performance.

 

◆ Energy saving: no high temperature heating is required. Can be prepared in any proportion with tap water. Can be used multiple times. It is generally recommended to use in the concentration range of 3%-5%.

 

◆ Safety: No phosphate. Harmless to aquatic organisms; non-toxic to humans; non-irritating to skin; PH is neutral. Does not burn.

 

◆ Environmental protection: Green environmental protection certification has been obtained. And passed the RHOS and SGS international environmental safety certification.

 

技术指标.jpg

 

Exterior

Density 15/4℃

odor

PH (5% solution)

Use temperature ℃

Light yellow transparent liquid

1±0.1

Basically tasteless

9~12

Normal temperature~60

Wash dirt

Stamping oil, cutting oil, drawing oil, grinding powder, etc.

Suitable material

Bearings, stampings, pipes, stainless steel, galvanized sheets, various alloys, etc.

Suitable for equipment

Mechanical cleaning, ultrasonic cleaning

 

The product parameters are subject to the MSDS and product single-page information provided by East Asia Petroleum (FABLE). For product data in "-", please consult online customer service.

 

应用领域.jpg

 

超声波清洗剂.jpg

 

注意事项.jpg

 

1. It is recommended to strengthen the ventilation and exhaust on site, and pay more attention to the operator's environmental standards when the air pressure is low in summer and winter.

2. You can use traditional manual cleaning, which is more suitable for ultrasonic equipment or vacuum cleaning dryer.

3. The cleaning site should be well ventilated to avoid the presence of open flames.

4. It has degreasing effect and should not be in contact with the skin for a long time.