福邦化学润滑油（越南）责任有限公司
FORBON CHEMICAL LUBRICANTS (VIETNAM) CO., LTD.
SERVICE HOTLINE
0274-36629050366-642808
FOLLOW US
A. There are too many oils. It takes a lot of time to choose. You can tell the customer service to recommend the cost-effective compressor oil for you.
B. Understand the oil product you need, you can directly inform the customer service of the oil product name or related parameters, and get relevant product information and quotation immediately.
C. If the purchase volume is large, you can find out the products with good market sales through customer service through the channels below, and obtain product quotes at the same time.
Formulated with high-quality mineral base oil and high-performance additives, it provides unique protection and reliable lubrication for equipment under moderate to severe working conditions. Contains special ash-free antioxidants, rust inhibitors and anti-foaming agents, hardly produces carbon deposits, keeps exhaust valves clean, extends disassembly and repair intervals, reduces operating costs, and minimizes equipment failures, downstream fouling and lubricant belts To reduce equipment maintenance costs.
◆ It is not easy to deposit carbon. The base oil used has little tendency to form carbon deposits. It contains antioxidants, which minimizes the formation of carbon deposits and paint film on the top of the air valve and piston, thus keeping the compressor running efficiently.
◆ Longer oil change interval-The maintenance interval between the valve and the piston can be greatly extended, and the compressor can maintain stable and efficient operation for a long time.
◆ The anti-corrosion agent protects the internal structure of the compressor extremely effectively and prolongs the service life. (In order to achieve the best state of corrosion resistance, it is recommended not to mix it with engine oil).
◆ The anti-wear agent combined with the characteristics of the base oil can prevent the wear of the piston ring to the greatest extent.
◆ Suitable for all kinds of reciprocating air compressors.
◆ Meet ISO 6743 L-DAH specifications.
◆ It can be used as lubricating oil for gearbox, cylinder or gearbox/cylinder.
◆ The applicable maximum compression temperature can reach 220℃.
|
project |
Flash point COC℃ |
Pour point ℃ |
Viscosity mm2/s40℃/100℃ |
ISO viscosity grade |
Density@15℃kg/m3 |
|
P68 |
235 |
-33 |
68/7.8 |
60 |
883 |
|
P100 |
240 |
-33 |
100/9.2 |
100 |
899 |
|
P150 |
240 |
-30 |
150/12.1 |
150 |
902 |
Remarks: The above technical data is the average of the current product test results of East Asia Petroleum, which may be affected by the limited errors in production. We reserve the right to modify the data.
It is suitable for the compression chamber, transmission gear and other parts of single-stage and multi-stage reciprocating air compressors and oil-lubricated rotary compressors with exhaust temperatures up to 220°C.
● Packing specification: 18 liters/barrel or 200 liters/barrel.