福邦化学润滑油（越南）责任有限公司
FORBON CHEMICAL LUBRICANTS (VIETNAM) CO., LTD.
SERVICE HOTLINE
0274-36629050366-642808
FOLLOW US
A. There are too many oils. It takes a lot of time to choose. You can tell the customer service the needs and recommend rail oil with high cost performance for you, no need to turn the page to find.
B. Understand the oil product you need, you can directly inform the customer service of the oil product name or related parameters, and get relevant product information and quotation immediately.
C. If the purchase volume is large, you can find out the products with good market sales through customer service through the channels below, and obtain product quotes at the same time.
The FABLE rail oil T series is an excellent quality lubricating oil. It is carefully prepared from highly refined paraffin-based mineral oil, rail oil compound additives, adhesives, anti-foaming agents, etc. It does not contain sulfides and has excellent anti-wear, Anti-creep, anti-rust, anti-oxidation and other characteristics. Specially designed for the guide rails of modern high-demand machine tools, it is the guide rail oil that meets the lubrication requirements of today's machine tools.
◆ Strong adhesion, can prevent contact surface wear and sliding block, prevent stick slip phenomenon.
◆ It is suitable for lubrication of processing machinery guide rails under various speeds and loads. Excellent friction performance can reduce the shock of the guide rails due to "crawling".
◆ High oxidation stability, which can be used at high temperature to prolong the service life of oil products.
◆ High viscosity index, low viscosity when getting up and starting, can maintain proper viscosity at high working temperature and reduce oil leakage.
Suitable for all machine tool components, including bearings and gearboxes that use circulating system lubricants, and machine tool hydraulic systems.
|
project |
Flash point (open cup) °C |
Pour point °C |
Viscosity 40℃mm2/s |
Viscosity index |
ISO viscosity grade |
|
T32 |
215 |
-30 |
32 |
107 |
32 |
|
T68 |
225 |
-18 |
68 |
104 |
68 |
|
T100 |
250 |
-6 |
100 |
98 |
100 |
|
T220 |
240 |
-3 |
221 |
98 |
120 |
Remarks: The above technical data is the average of the current product test results of East Asia Petroleum, which may be affected by the limited errors in production. We reserve the right to modify the data.
◆ T32 is recommended for small machine tools and also suitable for large machine tools as immersion applications.
◆ T68 is recommended for small and medium-sized machine tools.
◆ T100 is recommended for rail and gear lubrication systems.
◆ T220 is recommended for large machine tools with high guide rail pressure or high precision requirements. It is also suitable for the lubrication of vertical and inclined guide rails with leakage problems.
◆ Aqueous coolant will be contaminated with traditional mineral oil and shorten the service life.
It is suitable for bearings, spindles, rollers, churn tips, slideways and guide rails of most machines and machine tools.
● Packing specification: 18 liters/barrel or 200 liters/barrel.