福邦化学润滑油（越南）责任有限公司
FORBON CHEMICAL LUBRICANTS (VIETNAM) CO., LTD.
SERVICE HOTLINE
0274-36629050366-642808
FOLLOW US
A. There are too many oils. It takes a lot of time to choose. You can tell the customer service to recommend the cost-effective transformer oil for you, no need to turn the page to find.
B. Understand the oil product you need, you can directly inform the customer service of the oil product name or related parameters, and get relevant product information and quotation immediately.
C. If the purchase volume is large, you can find out the products with good market sales through customer service through the channels below, and obtain product quotes at the same time.
FABLE transformer oil is made of moderately refined low-viscosity, low-frequency point naphthenic base, base oil and high-quality anti-oxidant compound additives. It has the characteristics of rapid heat transfer, good oxidation stability and excellent electrical performance. The product is produced under strict quality control procedures, with stable performance and fixed resources. Product quality performance meets the requirements of GB2536-2004 standard.
● Excellent electrical insulation performance, high breakdown voltage and low dielectric loss factor, which can effectively prevent the discharge phenomenon and power loss under high voltage electric field.
● Good thermal stability and oxidation stability can prevent the formation of acid and sludge during use, and extend the service life of electrical equipment.
● Lower viscosity, provide effective cooling and heat transfer and low temperature start.
● Excellent low temperature performance, without pour point depressant.
● The content of naphthenes and aromatic hydrocarbons is appropriate to ensure that the sludge formed during the operation of electrical equipment is dissolved to avoid damage to insulating materials and affect heat transfer.
It is suitable for 500KV transformers and electrical equipment with similar requirements, as well as all voltage grade AC transformers, pipe sleeve equipment, etc.
|
project |
Density (20℃), kg/m3 |
Kinematic viscosity, mm2/s, 40℃ |
Pour point, ℃ |
Flash point (closed), ℃ |
|
KB-25# |
885.6 |
9.648 |
<－24 |
143 |
|
KB-45# |
879.9 |
9.655 |
<－45 |
144 |
Remarks: The above technical data is the average of the current product test results of East Asia Petroleum, which may be affected by the limited errors in production. We reserve the right to modify the data.
● Transformer oil is easily contaminated by moisture, various solid particles, fibers, etc. Therefore, it is very important to keep the transformer oil dry and clean.
● Transformer oil should be stored indoors or under controlled climate as much as possible. If stored outdoors, there should be rain shelters.
● The storage container must be dedicated, and it is strictly forbidden to contact engine oil, hydraulic oil, gear oil and other lubricants.
● Packing specification: 18 liters/barrel or 200 liters/barrel.