福邦化学润滑油（越南）责任有限公司
FORBON CHEMICAL LUBRICANTS (VIETNAM) CO., LTD.
SERVICE HOTLINE
0274-36629050366-642808
FOLLOW US
A. There are too many oils, and it wastes time to choose. You can tell the customer service about your needs, and recommend cost-effective degreasers for you, without turning the page to find.
B. If you understand the oil products you need, you can directly inform the customer service of the oil product name or related parameters, and get relevant product information and quotations immediately.
C. If the purchase volume is large, you can learn about products with good sales in the market through the customer service channels below, and obtain product quotations at the same time.
FABLE metal degreasing is mainly formed by the compounding of a variety of surfactants, rather than simple alkaline additives. Lubricate, emulsify, dissolve wax, grease, cutting fluid, etc. to achieve the purpose of decontamination. It can be used for degreasing and degreasing treatment of aluminum and aluminum alloys, to remove lubricating oil and wax grease in the process of aluminum processing. It is suitable for coating with copper, aluminum, zinc and other non-ferrous metals, and cleaning of oil stains before electroplating.
|
Metal degreasing agent X-801 |
White powder |
This product is made up of a variety of non-ionic and anionic surfactants, rust inhibitors and fine additives. It is low alkaline, non-irritating to the skin, and can be used at room temperature. It is suitable for cast iron and aluminum alloys with high requirements for rust prevention. And cleaning of hardware products. |
Purified water preparation, capacity: 2% -5% operation time: 40 seconds to 60 minutes;
This product is better for heating at 70-80℃ |
8-9 |
|
Metal degreasing agent X-802 |
White powder |
This product has strong dirt ability and high alkalinity. It is used to remove difficult-to-handle dirt. It is safe, non-toxic and easy to use. It is also compatible with stainless steel kitchenware, mechanical degreasing bearings and precision hardware parts by soaking, spraying or ultrasonic use. It is suitable for the cleaning of cast iron, carbon steel, molds and stainless steel products with high anti-rust requirements. |
Purified water preparation, capacity: 2% -5% operation time: 40 seconds to 60 minutes;
This product is better for heating at 70-80℃ |
>12 |
Remarks: The above technical data is the average of the current product testing results of East Asia Petroleum, which may be affected by limited errors in production. We reserve the right to modify the data.
It can be used to degrease heavy metal preparations and clean high-quality and high-precision mechanical parts, for metal cleaning and rust prevention. For occasions where traditional degreasing and degreasing agents cannot clean heavy oil stains, or where traditional cleaning agents on the market are not thoroughly degreasing, using this product is the best choice, which can effectively clean all kinds of metal processing oils. Maintain long-term stability, and finally make the surface of the product clean.
1. It is recommended to strengthen the ventilation and exhaust on site, and pay more attention to the operator's environmental standards in summer and winter when the air pressure is low.
2. You can use traditional manual cleaning, which is more suitable for cleaning with ultrasonic equipment or vacuum cleaning and drying machine.
3. The cleaning site should be well ventilated to avoid open flames.
4. It has degreasing effect and should not be in contact with skin for a long time.