福邦化学润滑油（越南）责任有限公司
FORBON CHEMICAL LUBRICANTS (VIETNAM) CO., LTD.
SERVICE HOTLINE
0274-36629050366-642808
FOLLOW US
A. There are too many oils, and it wastes time to choose. You can tell the customer service about your needs and recommend cost-effective cleaning agents for you, without turning the page to find.
B. If you understand the oil products you need, you can directly inform the customer service of the oil product name or related parameters, and get relevant product information and quotations immediately.
C. If the purchase volume is large, you can learn about products with good sales in the market through the customer service channels below, and obtain product quotations at the same time.
| Water-based rust inhibitor |
CP-35 |
High performance, ashless rust inhibitor component, neutralized with AMP-95, liquid product. It can be used to add semi-synthetic, fully synthetic, water-based cleaning agent and other products as a combination of rust inhibitors; it can also be used as a water-based rust inhibitor, mixed with water, for rust prevention between processes. |
|
Water-based rust inhibitor |
CP-20 |
It can be used as an anti-rust agent component in additives to semi-synthetic, fully synthetic, water-based cleaning agents and other products; it can also be used as a water-based anti-rust agent with water to prevent rust between processes. |
|
Aluminum alloy rust and corrosion inhibitor |
Corrguard SI |
Aluminum alloy rust and corrosion inhibitor, this product is a new generation of silicon and phosphorus-free aluminum alloy rust and corrosion inhibitor developed by Dow Chemical and Angus Chemical. It has a very good anti-rust effect on A12024, A1380, A16061, A17075, A1356 aluminum commonly used in automobiles, aerospace, etc.; it is effective for alloys such as galvanized steel and annealed galvanized steel. |
|
Defoamer |
StarDF 390 |
Using non-ionic surfactants as defoaming ingredients, this product has low viscosity, good fluidity, easy to disperse, has good acid and alkali resistance, and has excellent foam breaking, defoaming and long-lasting foam produced by water solubility. Suffering ability. |
|
BK |
The bactericide BK is a water-based, low-toxic bactericide, developed for water-based products to resist bacteria and fungi in humid environments, especially in high temperature environments. Its chemical structure is 1,3,5-tris(2-hydroxyethyl)hexahydrotriazine. |
|
MBM |
It has long-lasting sterilization effect, low odor, environmental protection and strong formula compatibility. It is a new type of fungicide currently popular abroad. |
|
IPBC30 |
Low toxicity fungicide, used to prevent and kill microorganisms such as mold, yeast, algae in products. |
|
CM14 |
Isothiazolinone. It is the same bactericide as Kathon 886MW (also known as "Kason" or "Kason" 886). It is fast sterilization, and it is used on site, with 200-300ppm plus dose. |
|
BIT20 |
1,2 Benzoisothiazolin-3-one, low toxicity, broad-spectrum formaldehyde-free fungicide, good thermal and chemical stability. |
1. It is recommended to strengthen the ventilation and exhaust on site, and pay more attention to the operator's environmental standards in summer and winter when the air pressure is low.
2. You can use traditional manual cleaning, which is more suitable for cleaning with ultrasonic equipment or vacuum cleaning and drying machine.
3. The cleaning site should be well ventilated to avoid open flames.
4. It has degreasing effect and should not be in contact with skin for a long time.