福邦化学润滑油（越南）责任有限公司
FORBON CHEMICAL LUBRICANTS (VIETNAM) CO., LTD.
SERVICE HOTLINE
0274-36629050366-642808
FOLLOW US
A. There are too many oils, and it wastes time to choose. You can tell the customer service about your needs and recommend cost-effective high-temperature greases for you, without turning the pages to find them.
B. If you understand the oil products you need, you can directly inform the customer service of the oil product name or related parameters, and get relevant product information and quotations immediately.
C. If the purchase volume is large, you can learn about products with good sales in the market through the customer service channels below, and obtain product quotations at the same time.
It is compounded by deeply refined base oil, extreme pressure additives, and organic expansion lubricating thickener. It is suitable for the lubrication of bearings under industrial high temperature conditions, such as exhaust fan bearings, industrial furnace door bearings, transmission belt bearings, rotary bearings, so that the product can effectively protect the bearings and make the equipment run smoothly; strong water resistance, suitable for wet conditions usage of. A new type of high temperature grease that can be used at a temperature of 250°C under frequent supplementary lubrication conditions.
● Maintain excellent lubrication ability under high temperature conditions, excellent oxidation stability, and have a longer service life.
● Excellent water resistance, rust resistance and oxidation resistance, ensuring the protection and lubrication of equipment in the presence of water or in a humid environment.
● Strong anti-wear ability, good resistance to chemical media, and strong corrosion resistance can meet the lubrication requirements of heavy load and shock load mechanical equipment.
It is suitable for the lubrication of the friction parts (high temperature sliding bearings and chains, etc.) of high-temperature heavy-duty equipment in the cement, glass, textile, steel and other industries, as well as the lubrication of equipment under similar working conditions.
|
projectltem |
Typical data Typical Data |
Cone into 1/10mm Cone into the 1/10 mm |
NLGI level NLGI level |
Dropping point °C Drop point ℃ |
Thickener m%Thickener m % |
Viscosity mm2/S 40℃100℃ Viscosity was 40 ℃ 100 ℃ / S |
|
HP1 |
325 |
1 |
260 |
7.5 |
92.5/10.5 |
|
|
HP2 |
290 |
2 |
260 |
10.0 |
92.5/10.5 |
Note: The above technical data is the average value of East Asia Petroleum's current product testing results, which may be affected by limited errors in production. We reserve the right to modify the data.
1. Do not mix with other greases. Physical or chemical reactions may occur between different greases, resulting in a significant drop in performance.
2. Seal the cover in time after use to avoid mixing of impurities such as moisture and dust.