FABLE heat transfer oil is a high-performance product used in closed indirect heating devices. Formulated from highly refined base oil, it has resistance to thermal cracking and chemical oxidation, good heat transfer efficiency, and its excellent viscosity characteristics make it easy to pump at start-up and operating temperatures, with very good thermal stability , The service life is extremely long, and there will be no scaling or viscosity increase during use. Recommended for closed and open cold oil seal indirect and cooling systems for various industrial processes, its excellent quality meets international ISO6743/12 and DIN51502 standard specifications.

● Appropriate viscosity: The low-viscosity heat transfer medium is beneficial to achieve a high heat transfer coefficient under turbulent conditions, and has good pumpability at low temperatures, making the pumping device easy to start.

● Higher specific heat and thermal conductivity to facilitate higher thermal efficiency.

● Excellent high and low temperature performance and excellent viscosity-temperature characteristics: the viscosity changes little with temperature, the low temperature fluidity is good, the flash point and spontaneous ignition point are high, the thermal decomposition temperature is high, which can meet the temperature of 300 ℃ in the pipeline and 400 of the boiler heating system temperature High temperature use requirements above ℃, with super fire resistance.

● Excellent chemical stability and thermal stability, with extremely low volatility, good thermal oxidation stability, and extremely long service life.

● Good radiation resistance and adaptability to rubber seals.

It is suitable for open or closed oil heating system (oil valley furnace, oil heat exchanger, oil heating sleeve, oil flow thermostat, etc.) as heat transfer oil. Sealed heat conduction system with oil temperature not exceeding 350℃.

Remarks: The above technical data is the average of the current product test results of East Asia Petroleum, which may be affected by the limited errors in production. We reserve the right to modify the data.

It is suitable for open or closed oil heating system (oil valley furnace, oil heat exchanger, oil heating sleeve, oil flow thermostat, etc.) as heat transfer oil. Sealed heat conduction system with oil temperature not exceeding 350℃.

● First, make sure that the machine is stationary and cold, and the temperature of the heat transfer oil does not exceed 50 degrees

● Secondly, unscrew the oil drain plug at the bottom of the gearbox, and use the barrel to catch the waste oil until the oil drain port leaks out.

● Then flush the gearbox with new oil, then screw on the oil drain plug and fill the new oil to the specified liquid level.

● Packing specification: 18 liters/barrel or 200 liters/barrel