福邦化学润滑油（越南）责任有限公司
FORBON CHEMICAL LUBRICANTS (VIETNAM) CO., LTD.
SERVICE HOTLINE
0274-36629050366-642808
FOLLOW US
A. There are too many oils. It takes a lot of time to choose. You can tell the customer service the needs and recommend a cost-effective quenching oil for you. There is no need to turn the page to find.
B. Understand the oil product you need, you can directly inform the customer service of the oil product name or related parameters, and get relevant product information and quotation immediately.
C. If the purchase volume is large, you can find out the products with good market sales through customer service through the channels below, and obtain product quotes at the same time.
This product is prepared by using deep refined mineral oil as the base oil, added with high-quality additives such as coolant, brightener, antioxidant, etc. It is mainly used to protect the heated workpiece in the atmosphere for quenching. After quenching, the processed parts keep the workpiece bright and increase the workpiece Hardness and wear resistance. Strong cooling capacity, fast cooling at high temperature, moderate cooling at low temperature, can not only achieve high and uniform surface hardness and sufficient hardened layer depth of the workpiece, but also provide good control of quenching deformation, heat Good oxidation stability and long service life.
|
category |
Oil products and characteristics |
|
General quenching oil FD-1001 |
It is suitable for workpiece quenching with simple shape and general hardenability. It is economical and durable, with high cost performance, good light benignity, and easy to clean the workpiece. The low-temperature cooling rate is moderate, the distortion of the workpiece during quenching is small, the steam film stage is short, the cooling speed is fast, and it has strong hardening ability and hardening effect. |
|
High-speed quenching oil FD-1021 |
It has good hardening efficiency and thermal stability. This quenching oil is a high-speed quenching oil. It is used to quench a large number of workpieces in a compact basket. It is suitable for providing maximum hardness and minimum deformation during high-speed quenching. |
|
Isothermal quenching oil FD-1040 |
High flash point and ignition point, suitable for martensitic isothermal graded quenching, can significantly reduce the quenching deformation of workpieces with thin walls and complex shapes, has high cooling capacity in hot state, good thermal oxidation stability, and is used under high temperature conditions Long life, especially suitable for heat treatment of ultra-thin and complex workpieces such as ring gears, clutch plates, gears, gear shafts, bearing rings, motorcycle connecting rods, cranks, pins, etc. |
|
Quick bright quenching oil FD-1042 |
This product is a high-quality heat treatment oil with good brightness and can provide a significant service life. It is suitable for the quenching process of bearing steel, tool steel, alloy steel, low alloy steel, cemented carburizing steel, etc.; the recommended temperature is 20 -90℃. |
|
Steel environmental protection Quenching fluid |
It is a special aqueous quenching liquid for high-quality heat treatment. It will not catch fire and burn, and there is no danger of fire. It can effectively improve the working environment of the heat treatment workshop. There is no oil fumes and it is easily soluble in water. By adjusting the concentration of the aqueous solution, different cooling rates can be obtained. The cooling speed between water or water-oil meets the quenching requirements of different materials and workpieces.
Main features: no corrosion to metal, bright quenched workpiece and anti-rust function, can be directly tempered without cleaning. The hardened layer is deep, the quenching hardness is uniform, and there is no soft spot. It is especially suitable for low and medium carbon steel induction and large parts quenching.
The requirements for the equipment of the quenching tank are simple. Both steel plates and cement for the liquid pool are available. The initial investment cost is low, the service life is long, and the effective components will not be volatile and degraded. In use, only the volatile moisture needs to be added, and the quenching carried by the workpiece The liquid can be used as water supplement in the cleaning tank, recycled, no discharge, and environmental protection. |
Remarks: The above technical data is the average of the current product test results of East Asia Petroleum, which may be affected by the limited errors in production. We reserve the right to modify the data.
Used for high-precision parts, such as tools, gears, bearings, piston rings, etc.
● Packing specification: 18 liters/barrel or 200 liters/barrel