In the process of processing petroleum processing requirements (such as surface treatment, heat treatment, etc.), various oils are used to contaminate metals. This oil pollution is mainly mineral oil, animal and vegetable oil, emulsion and so on. This kind of oil is simple in composition, not strong in adhesion, exists in a short period of time, and is relatively easy to eliminate on the metal surface, so choose an aqueous metal cleaning agent based on the weight of the diluted washing oil.

The water-based cutting fluid is used after being diluted with water. The mass density of the oil (liquid) mist is large, so it is easy to sink. Therefore, it is less likely to float in the workshop and cause less damage to the respiratory organs of the operator. However, in some specific environments, the heavy-duty cutting and grinding process using emulsified cutting fluid and micro-emulsified cutting fluid will also produce a misty atmosphere around the machine tool. Due to the action of alkaline substances and surfactants in this mist, it will irritate the operator's respiratory mucosa.

1. When changing the cutting fluid of the machine tool, be sure to pour the original cutting fluid clean and wash it thoroughly; otherwise, the original residual cutting fluid that has been deteriorated may cause rapid deterioration of the cutting fluid just replaced. 2. When adding cutting fluid during the production process, it must be added according to the proportions in the manual. Do not add water and no cutting fluid, otherwise it may cause product rust. 3. After adding the cutting fluid to the machine, do not leave it for a long time. When the machine is not in production, it is best to turn on the pump every day to circulate the cutting fluid for 30 minutes.

There is no relevant national standard and industry standard in stamping oil in my country. There is only one enterprise standard Q/MLN 0001-2015 stamping oil can be found. The stamping oil testing items specified in Q/MLN 0001-2015 only have four indicators: appearance, density, viscosity, and flash point. Therefore, the lack of standards has caused many problems for customers who purchase stamping oil.

Spark discharge can generate a large amount of heat energy in an instant, and the temperature can reach 10,000 degrees Celsius, which can immediately melt and vaporize metal materials. EDM is mainly used for the processing and manufacturing of metals, molds and mechanical equipment, and molds and parts with complex shapes. . EDM oil can insulate deionization, cool the high temperature during EDM, and eliminate carbon slag. It is suitable for discharge medium liquid indispensable to EDM workers.

Fubon FABLE guide rail oil uses raw materials of the same quality as international first-line brands. At present, international first-line brand lubricant blending factories are all located in China. The difference is that their brand premium is higher, which is passed on to the factory oil cost.

In the stretching process, due to the relatively large degree of processing of the workpiece, we need to choose stamping stretching oil with better performance when choosing the stretching oil, so what kind of stretching oil is better? ? Now introduce a few methods of selecting stamping and drawing oil.

FABLE, a global technology (metal processing) expert, has accumulated 20 years of professional and successful experience in the metal processing industry in China, and has the world's leading metal processing technology!

The electrical contact of the switch is one of the important parts in the electrical contact system. The appropriate contact lubricant can effectively improve the electrical performance of the contact. Most of the grease for the electrical contact of the switch is used for the sliding contact. It can be roughly divided into large current contacts mainly made of copper materials and small current contacts mainly made of silver materials.

In ancient times, animal and vegetable oils were used for lubricating grease. Butter was often used for lubrication. So the original grease, commonly known as tallow, began to use calcium-based saponified tallow to produce calcium-based grease. The color was yellow and commonly known as butter.

Centrifugal cutting fluid purifier can be used: FABLE brand intelligent cutting fluid purifier, which is well known by the majority of users. The product design of intelligent cutting fluid purifier is simple and reasonable, and the effect is obvious

MVR negative pressure evaporation technology has strong adaptability, low energy consumption, and has many advantages in difficult emulsion wastewater